SD Roof System
The SD roof system is formed in the construction site, using a special closed type fixing set to have air-tight connection with 360 degree double scrolled roof seaming set (patent nr.：ZL01237936.0).
The entire roof becomes an airtight membrane after all panels are completely seamed together, providing strong wind uplift resistance, high efficient insulation and excellence for weather tightness.
The structural influence in the roofing system due to heat expansion can be eliminated by the movement of the sliding clip in the fixing set.
Application in the wider roofing system is feasible. |
 |
|
LD Roof System
Our LD model roof plate is fixed by two special clips (interlocked) and by sandwich fixing set
Excellent resistance to wind load, snow load and loading capacity
The movable steel panel function avoids possible damage due to heat expansion or cold shrinkage.
The maximum length of single roof plate is 200m, which is convenient for large-scale building project. |
 |
|
KD Roof System
The KD Roof system utilizes concealed clip connection set to interlock with the steel panel.
High wind-uplift resistance capacity and good weatherproof
Panel is allowed to move due to thermal expansion and cold contraction that can avoid damage to the panel.
Application to wider roof building is feasible. |
 |
|
CP Roof System
CP roof system is an application by using a LND liner panel to match any type of our roof panels. A glass wool material is used as insulation between the two panels. The LND liner panel can provide clean and neat appearance under the roof and to protect the insulation layer, the LND is used in the lower level of wave crest. |
 |
|
CD II Wall System
The screws direct penetrate the fixing system of panels
These are economical models and are widely used on narrow roof systems
Special connection methods that provide good weather proof function. |
 |
| |
CN
EN